Markbass Mini CMD 151P IV 500W 1x15 Bass Combo Overview
The Mini CMD 151P IV is the best-sounding and most compact 1x15" combo out there, sending out 300W of power through a single Markbass custom neodymium speaker and piezo tweeter. Highly portable and astoundingly loud for its size, this combo gets even louder when connected to an extension cabinet, most effectively the New York 151. The new Little Mark IV Combo head features the new bi-band limiter, a MUTE switch and the 3-way switch that includes the options of Flat, Scooped or FSW.
- LITTLE MARK IV COMBO specs
- INPUTS
- INPUT impedance: 1 Mohm, max. voltage: 9 Vpp
- RETURN impedance: 22 Kohm, max. voltage: 10 Vpp
- CONTROLS
- GAIN –46 dB to +23 dB range
- LINE OUT level control on front panel
- PRE/POST EQ (for line out) switch on rear panel
- GROUND LIFT switch on rear panel
- MUTE SWITCH
- MASTER VOLUME
- EQUALIZATION
- LOW: center frequency 68 Hz; level: ±16 dB
- MID LOW: center frequency 360 Hz; level: ±16 dB
- MID HIGH: center frequency 800 Hz; level: ±16 dB
- HIGH: center frequency 10 kHz; level: ±16 dB
- OLD SCHOOL: max cut range: 250 Hz – 20 kHz
- 3 WAY SWITCH: flat/scooped-mid/FSW
- OUTPUTS
- SEND EFFECTS: unbalanced, max. voltage 20 Vpp
- TUNER OUT: unbalanced, max. voltage 2 Vpp
- LINE OUT balanced XLR, max. voltage 20 Vpp
- SPEAKER OUT: speakon/1/4” combo, 1/4”*
- OTHERS
- BI-BAND LIMITER
- FOOTSWITCH (OPTIONAL): FLAT/SCOOPED-MID
- OUTPUT POWER: 500W RMS @ 4 ohm, 300W RMS @ 8 ohm
- POWER REQUIREMENT:
- 100V; 120V; 230V; 240V 50/60Hz (Voltage is factory preset according to region of sale)
- SPEAKER: 1x15"
- TWEETER: piezo
- BASS REFLEX: rear
- IMPEDANCE: 8 ohms
- SPEAKER POWER HANDLING: 400W RMS (AES Standard)
- FREQUENCY RESPONSE: 40 Hz to 18 kHz
- CROSSOVER FREQUENCY: 3.5 kHz
- SENSITIVITY: 100 dB SPL
- WEIGHT: 40.79 lbs / 18.5 kg
- WIDTH: 18.27 in. / 46.4 cm
- HEIGHT: 18.27 in. / 46.4 cm
- DEPTH: 18.9 in. / 48 cm
- Minimum ohm load for the Little Mark IV Combo head is 4 ohms.
- Markbass amps/combos are manufactured to be sold and used in the country of purchase, and they are factory preset to that country’s voltage. Due to homologation issues, the voltage may not be changed.
- Product specifications are subject to change without notice.