Markbass Mini CMD 121P IV 500W 1x12 Bass Combo Overview
Our flagship combo Mini CMD 121P has changed the bass amp market forever. Never have bassists been able to get such great tone and volume from such a light and portable amp. This new version with Little Mark IV Combo head features the new bi-band limiter, a MUTE switch and the 3-way switch that includes the options of Flat, Scooped or FSW. As for previous version it can be easily upgraded to a powerful 2x12" 500W rig with the addition of a New York 121 cabinet.
- LITTLE MARK IV COMBO specs
- INPUTS
- INPUT impedance: 1 Mohm, max. voltage: 9 Vpp
- RETURN impedance: 22 Kohm, max. voltage: 10 Vpp
- CONTROLS
- GAIN –46 dB to +23 dB range
- LINE OUT level control on front panel
- PRE/POST EQ (for line out) switch on rear panel
- GROUND LIFT switch on rear panel
- MUTE SWITCH
- MASTER VOLUME
- EQUALIZATION
- LOW: center frequency 68 Hz; level: ±16 dB
- MID LOW: center frequency 360 Hz; level: ±16 dB
- MID HIGH: center frequency 800 Hz; level: ±16 dB
- HIGH: center frequency 10 kHz; level: ±16 dB
- OLD SCHOOL: max cut range: 250 Hz – 20 kHz
- 3 WAY SWITCH: flat/scooped-mid/FSW
- OUTPUTS
- SEND EFFECTS: unbalanced, max. voltage 20 Vpp
- TUNER OUT: unbalanced, max. voltage 2 Vpp
- LINE OUT balanced XLR, max. voltage 20 Vpp
- SPEAKER OUT: speakon/1/4” combo, 1/4”*
- OTHERS
- BI-BAND LIMITER
- FOOTSWITCH (OPTIONAL): FLAT/SCOOPED-MID
- OUTPUT POWER: 500W RMS @ 4 ohm, 300W RMS @ 8 ohm
- POWER REQUIREMENT:
- 100V; 120V; 230V; 240V 50/60Hz (Voltage is factory preset according to region of sale)
- SPEAKER: 1x12"
- TWEETER: piezo
- BASS REFLEX: rear
- IMPEDANCE: 8 ohms
- SPEAKER POWER HANDLING: 400W RMS (AES Standard)
- FREQUENCY RESPONSE: 45 Hz to 18 kHz
- CROSSOVER FREQUENCY: 3.5 kHz
- SENSITIVITY: 99 dB SPL
- WEIGHT: 26.24 lbs / 11.9 Kg
- WIDTH: 14.96 in. / 38 cm
- HEIGHT: 16.73 in. / 42.5 cm
- DEPTH: 14.17 in. / 36 cm
- Minimum ohm load for the Little Mark IV Combo head is 4 ohms.
- Markbass amps/combos are manufactured to be sold and used in the country of purchase, and they are factory preset to that country’s voltage. Due to homologation issues, the voltage may not be changed.
- Product specifications are subject to change without notice.