Boss RE-2 Space Echo Compact Delay Pedal Overview
Boss RE-2 Space Echo Compact Delay Pedal
Legendary Space Echo sound in a compact, feature-packed and pedalboard-friendly stompbox.
A Masterpiece Reborn
In developing the RE-2 and its big brother, the RE-202, BOSS engineers have fully reproduced all the complex, non-linear behaviours that contribute to the RE-201’s immortal character. We carefully analyzed several vintage RE-201s, including a pristine original unit from the BOSS and Roland factory archive. Everything that influences the sound has been recreated with all-new algorithms, including the tape path, record/playback mechanism, motor variations, preamp colouration, spring reverb character, and more.
Journey to Deep Space
The RE-2 squeezes the complete sonic character of the RE-201 into the classic BOSS compact pedal format. The 11-position mode selector lets you dial in different virtual tape heads with or without spring reverb, and you can balance the echo/reverb blend with independent level knobs. Every behaviour is accurately replicated, such as the gradual pitch change that occurs with Repeat Rate tweaks and the runaway feedback that happens when maxing the Intensity knob. And with the expressive Wow & Flutter control, you can conjure all the natural modulation characteristics that are essential to the Space Echo sound.
Built for Modern Players
The RE-2 takes the Space Echo experience further with versatile features for today’s music. Delay time has been doubled and tap tempo control is supported, and there’s a cool Twist function for creating evocative special effects as you perform. For the dry sound, you can choose between the warm and fat RE-201 preamp tone or a clean signal with zero processing. Full stereo I/O is available, and it’s possible to mute the dry signal for parallel effect setups and studio use. The RE-2 also supports expanded control via external footswitches or an expression pedal, including continuous pedal control of multiple panel functions at once.
>> Click here to learn more about the BOSS RE Space Echo series <<
- Modes: 11 modes
- Nominal Input Level: INPUT A(MONO), INPUT B: -20 dBu
- Maximum Input Level: INPUT A(MONO), INPUT B: +7 dBu
- Input Impedance: INPUT A(MONO), INPUT B: 1 M ohm
- Nominal Output Level: OUTPUT A(MONO), OUTPUT B: -20 dBu
- Maximum Output Level: OUTPUT A(MONO), OUTPUT B: +7 dBu
- Output Impedance: OUTPUT A(MONO), OUTPUT B: 1 k ohm
- Recommended Load Impedance: OUTPUT A(MONO), OUTPUT B: 10 k ohms or greater
- Bypass: Buffered bypass
- Controls: MODE knob, REPEAT RATE knob, WOW & FLUTTER knob, INTENSITY knob, TONE knob, ECHO knob, REVERB knob, CARRYOVER switch, Pedal switch
- Indicator: CHECK indicator (Used for indication of check battery)
- Power Supply: Alkaline battery (9 V, 6LR61), AC adaptor (PSA series: sold separately)
- Current Draw: 75 mA
- Expected battery life under continuous use (These figures will vary depending on the actual conditions of use.): Alkaline: Approx. 4.5 hours
- INPUT A(MONO) jack, INTPUT B jack, OUTPUT A(MONO) jack, OUTPUT B jack: 1/4-inch phone type
- CTL/EXP jack: 1/4-inch TRS phone type
- DC IN jack
- 73 (W) x 129 (D) x 59 (H) mm, 2-7/8 (W) x 5-1/8 (D) x 2-3/8 (H) inches
- 450 g, 1 lb
- Owner's manual
- Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information")
- Dry battery (9 V, 6LR61)
- AC adaptor: PSA series
- Footswitch: FS-5U
- Dual footswitch: FS-6, FS-7
- Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5
- * 0 dBu = 0.775 Vrms
