Audix MicroD Miniature Condenser Lug-Mounted Microphone Overview
Audix MicroD Miniature Condenser Lug-Mounted Instrument Microphone
The MicroHP condenser instrument microphone is manufactured with a uniformly controlled cardioid polar pattern and provides excellent isolation and feedback control on stage. Used for professional stage and studio applications, the MicroHP is designed with clarity, excellent transient response, resistance to feedback, and high SPL capabilities.
This mic is targeted for hand percussion instruments and drum instrument applications. Housed in an aluminium ring and isolated by means of a rubber shock mount system. The MicroHP attaches to the lug of an instrument via the Audix DCLAMP mounting system.
The MicroD miniature condenser instrument microphone requires phantom power of 9 – 52 V.- Transducer Type Pre-Polarized Condenser
- Frequency Response 40 Hz – 20 kHz
- Polar Pattern Cardioid
- Output Impedance 250 ohms
- Sensitivity 6 mV / Pa @ 1k
- Equivalent Noise Level 24 dB
- Signal to Noise Ratio 70 dB
- Maximum SPL ≥140 dB
- Power Requirements 9 – 52 V phantom
- Connector 3-pin mini to 3-pin XLRm (APS910)
- Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
- Materials / Finish Machined Brass Capsule / Black Finish
- Gooseneck Flexible Steel
- Weight 47 g / 1.6 oz
- Length 30 mm / 1.14 in
- 1x MicroHP Instrument Microphone
- 1x 6′ Shielded Cable
- 1x DCLAMPMICRO with flexible mini-gooseneck and drum tension lug clamp
- 1x APS910 48 V Phantom Power Adapter
- 1x WS20 External windscreen
- 1x P1 Carrying Pouch
