Shure SLXD14/SM35 Digital Headworn Wireless System with SM35 Headset Microphone Overview
Shure SLXD14/SM35 Digital Headworn Wireless System with SM35 Headset Microphone
The new SLX-D series from Shure delivers transparent, 24-bit digital audio and rock solid RF performance in an easy-to-use, easy-to-scale suite of versatile system configurations. Operate up to 32 compatible systems per 44 MHz UHF band, with easy setup and optional rechargeability accessories.
The Shure SLXD14/SM35 Digital Headworn Wireless System is perfect for hands free live performance, dynamic presentations and fitness professionals, featuring a sturdy headset microphone for exquisite sound in challenging environments. The SLXD14/SM35 comprises:
This is the UK version (K59) and operates in the 606-650MHz wireless band. If you require a different frequency band, please call the sales team on 01273 665400.
- Transparent 24-bit digital audio
- Extended 20 Hz to 20 kHz frequency range (microphone dependent)
- 120 dB dynamic range
- Digital predictive switching diversity
- 44 MHz tuning bandwidth (region dependent)
- 32 available channels per frequency band (region dependent)
- Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band
- Easy pairing of transmitters and receivers over scan and IR sync
- Rugged, durable construction
- Dimensions (H × W × D): 1.65 × 7.76 × 5.98 in (42 × 197 × 152 mm)
- Weight: 1.8 lb (816 g) without antennas
- Housing: Galvanized Steel
- Power Requirements: 15 VDC @ 600 mA Supplied by external power supply (tip positive)
- RF INPUT
- Spurious Rejection: >75 dB Typical
- Connector Type: BNC
- Impedance: 50 Ω
- AUDIO OUTPUT
- Gain Adjustment Range: –18 to +42 dB in 1 dB steps
- Configuration
- 1/4" (6.35 mm): Balanced (Tip=audio +, Ring=audio –, Sleeve=ground)
- XLR: Balanced (1=ground, 2=audio +, 3=audio –)
- Impedance
- 1/4" (6.35 mm): 1.3 kΩ (670 Ω Unbalanced)
- XLR (line): 400 Ω (200 Ω Unbalanced)
- XLR (mic): 150 Ω
- Full Scale Output
- 1/4" (6.35 mm): +15 dBV differentially (+9 dBV single)
- XLR (LINE setting): +15 dBV
- XLR (MIC setting): –15 dBV
- Mic/Line Switch 30 dB pad
- Phantom Power Protection
- 1/4" (6.35 mm): Yes
- XLR: Yes
- NETWORKING
- Network Interface: Single Port Ethernet 10/100 Mbps
- Network Addressing Capability: DHCP or Manual IP address
- Maximum Cable Length: 100 m (328 ft)
- Battery Type: Rechargeable Li-Ion or 1.5 V AA batteries
- Dimensions (H × W × D): 3.86 × 2.68 × 1.0 in (98 × 68 × 25.5 mm)
- Weight: 3.1 oz (89 g)
- Housing: PC/ABS
- AUDIO INPUT
- Connector: 4-Pin male mini connector (TA4M)
- Configuration: Unbalanced
- Impedance: 1 MΩ
- Maximum Input Level: 8.2 dBV (2.57 Vrms, 7.27 Vpp)
- Preamplifier Equivalent Input Noise (EIN): –118 dBV
- RF OUTPUT
- Antenna Type: 1/4 Wave
- Occupied Bandwidth: <200 kHz
- Modulation Type: Shure Propietary Digital
- Power: 1 mW/10 mW
- Type: Electret Condenser
- Frequency Response: 40 Hz to 20,000 Hz
- Polar Pattern: Unidirectional (Cardioid)
- Output Impedance @ 1 kHz: 2400 Ω
- Audio Output Level: -59.0 dBV/Pa
- Signal-To-Noise Ratio @ 1 kHz: 55 dB
- Maximum SPL 1000 Ω load @ 1% THD: 153.0 dB
- Dynamic Range @ 1 kHz, 1000 Ω load: 114.0 dB
- Equivalent Output Noise Typical, A-Weighted: 39 dB
- Power Requirements: +5 V DC (nominal), 10 V maximum (DC bias)
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 3 with respect to pin 1
- Cable: 1.1 m (45 in.)
- Connector: TA4F
- Net Weight: 72 g (2.53 oz.)