Sennheiser Drum Kit 600 Evolution Drum Microphone Set Overview
Sennheiser Evolution Drum Microphone Set
All you need for a powerful drum performance in a heavy duty case for optimal protection. This fantastic set includes:
The Sennheiser e 602 MKII is a cardioid instrument microphone best suited for use with bass drums, bass guitar cabs and tubas. It performs with fast transient response and follows bass instruments down to the low frequencies in high detail. The e 602 features robust, lightweight aluminium housing ensuring durability for both live and recording situations.
The e 604 is a small and compact dynamic cardioid drum and brass microphone that is compatible with snares, toms and percussion. It easily and securely clips on to the instrument and has tough reinforced housing and clamp. The e 604 is able to transmit high SPL's without any distortion and has very low sensitivity to impact and handling noise.
The Sennheiser e 614 is a super-cardioid electret condenser microphone that can be used as an overhead mic for percussion instruments or on woodwind, strings, for home recording. This microphone can be used for demanding instrument recordings and on performances that produce extended frequencies. The e 614 has high SPL handling and transient response, ideal for overhead placement. Finally, due to its precise directivity, the e 614 reduces the bleed from other instruments on stage or in the studio.
- Rugged reinforced fibreglass body
- Low sensitivity to impact and handling noise
- Very high sound pressure handling capability
- Low distortion microphone
- Hum compensating coil
- Easy to position due to compact design
- Integral stand mount
- Rugged design
- Effective rejection of incidental rear noise
- Excellent directivity across the whole frequency range Full, natural sound High maximum sound pressure level
- Wide frequency response
- Frequency response 40 Hz - 20 kHz
- Transducer principle permanently polarized condenser
- Pick-up pattern supercardioid
- Sensitivity in free field, no load (1kHz) 3 mV/Pa = - 50dB (0 dB = 1 V/Pa)
- Nominal impedance 50 Ohm
- Min. terminating impedance 1 kOhm
- Dimensions W = 20mm, L = 100mm
- Maximum sound pressure level (passiv) 139 dB/SPL
- Rugged, lightweight aluminium body for stable positioning on long microphone boom arms
- Lightweight high-performance voice coil construction
- Fast transient response
- Low frequency extension
- Ideal for direct use on the most problematic bass signal
- Frequency-independent directivity provides isolation from other on-stage signals
- Humbucking coil
- Integral stand mount