Rode M2 Condenser Microphone Overview
The Rode M2 builds on the success of Rode's TEC Award-winning S1 microphone, the company's first condenser aimed at performance applications.Condenser microphones are not generally used in live applications because of their perceived fragility and susceptibility to feedback. And that's where the M2 is very different from a condenser aimed at studio use. To protect the M2 from the rough treatment it's likely to encounter on stage, the capsule is suspended within a shock mounting system built into the mic's heavy-duty metal body.
To prevent the microphone picking up signals that might cause feedback, the M2's capsule has been engineered to provide a super-cardioid pickup pattern. This means the microphone will reject sound sources in front of and to the sides of the capsule, capturing only the sound from directly in front of it.
Features
- Designed for professional vocalists
- Internally shock mounted capsule
- Wide frequency response captures every detail of your voice
- On/off switch with lockable screw
- Complete with zippered carry case and mic mount
- Live condenser vocal microphone
- Feedback rejecting super-cardioid pick up pattern
- Locking on/off switch
- Heavy duty metal body
- High level of RF rejection
- Low handling noise
- 1 x M2 condenser microphone
- 1 x ZP1 zippered carry case
- 1 x RM1 mic stand mount
- Power: P24/48V phantom power
- Acoustic Principle: Pressure gradient
- Directional Pattern: Super-Cardioid
- Frequency Range:35Hz - 20kHz
- Output impedance: 50 ohm
- Signal Noise Ratio: 71dB SPL (A - weighted per IEC651)
- Equivalent Noise: 23dBA SPL (A - weighted per IEC651)
- Maximum SPL: 141dB (@1kHz, 1 THD into 1k ohm load)
- Maximum Output Voltage: +5.2dBu (@1kHz, 1 THD into 1k ohm load)
- Sensitivity: -44dB re 1 Volt/Pascal (6.3 mV @ 94 dB SPL) +/- 2 dB @ 1kHz
- Weight: 308 grams
- Dimensions (HxWxD): 187 x 47 x 47 mm