Markbass CMD 102P IV 500W 2x10 Bass Combo

Markbass CMD 102P IV 500W 2x10 Bass Combo Overview

This front-ported 2x10 combo is a great option for gigging bassists who want to cut through the mix without a big rig. The more aggressive tone of the 10” speakers means you can often get by just with this combo, but it does also stack with any 8 ohm Traveler or Standard cab, for more volume and headroom. The CMD 102P IV combo is perfect for any situation. The new Little Mark IV Combo head features the new bi-band limiter, a MUTE switch and the 3-way switch that includes the options of Flat, Scooped or FSW. The wedge cabinet design allows to use it either in a standard vertical position or as floor monitor, offering to you the best monitoring on stage.

LITTLE MARK IV COMBO specs
INPUTS
INPUT impedance: 1 Mohm, max. voltage: 9 Vpp
RETURN impedance: 22 Kohm, max. voltage: 10 Vpp
CONTROLS
GAIN –46 dB to +23 dB range
LINE OUT level control on front panel
PRE/POST EQ (for line out) switch on rear panel
GROUND LIFT switch on rear panel
MUTE SWITCH
MASTER VOLUME
EQUALIZATION
LOW: center frequency 68 Hz; level: ±16 dB
MID LOW: center frequency 360 Hz; level: ±16 dB
MID HIGH: center frequency 800 Hz; level: ±16 dB
HIGH: center frequency 10 kHz; level: ±16 dB
OLD SCHOOL: max cut range: 250 Hz – 20 kHz
3 WAY SWITCH: flat/scooped-mid/FSW
OUTPUTS
SEND EFFECTS: unbalanced, max. voltage 20 Vpp
TUNER OUT: unbalanced, max. voltage 2 Vpp
LINE OUT balanced XLR, max. voltage 20 Vpp
SPEAKER OUT: speakon/1/4” combo, 1/4”*
OTHERS
BI-BAND LIMITER
FOOTSWITCH (OPTIONAL): FLAT/SCOOPED-MID
OUTPUT POWER: 500W RMS @ 4 ohm, 300W RMS @ 8 ohm
POWER REQUIREMENT:
100V; 120V; 230V; 240V 50/60Hz (Voltage is factory preset according to region of sale)
SPEAKER: 2x10"
TWEETER: piezo
BASS PORT: front
IMPEDANCE: 8 ohms
SENSITIVITY: 101 dB SPL
SPEAKER POWER HANDLING:
400W RMS (AES Standard)
FREQUENCY RESPONSE: 40 Hz to 18 kHz
CROSSOVER FREQUENCY: 3.5 kHz
WEIGHT: 38.14 lbs / 17.3 Kg
WIDTH: 23.03 in. / 58.5 cm
HEIGHT: 18.5 in. / 47 cm
DEPTH: 18.7 in. / 47.5 cm
Minimum ohm load for the Little Mark IV Combo head is 4 ohms.
Markbass amps/combos are manufactured to be sold and used in the country of purchase, and they are factory preset to that country’s voltage. Due to homologation issues, the voltage may not be changed.
Product specifications are subject to change without notice.

Markbass MB58R CMD 102 PURE 500W 2x10 Bass Combo

£1,019.00

With

deposit ({{getRoundNumber(DepositAsPercentage, 0)}}%)

NAME

APR

{{euroPriceDataCurrencySymbol}} p/m

{{product.APR}}%

Total finance: {{getFormattedEuroPrice(CurrentAmount - DepositValue, 2)}}

Finance example: {{SelectedProductDescription}}

Only available to UK residents, subject to age, status and affordability. To apply for finance, add the product to your basket, proceed to checkout and select 'Apply for Finance' as your payment option where you can complete the application form online.

GAK.CO.UK LTD is registered in England and Wales 04578270. Registered office: 30 - 34 North Street Hailsham East Sussex BN27 1DW. GAK.CO.UK LTD is the broker and not the lender and only offers credit products from Secure Trust Bank PLC trading as V12 Retail Finance. GAK.CO.UK LTD is an appointed representative of The Guitar Amp and Keyboard Centre Limited which is authorised and regulated by the Financial Conduct Authority. GAK.CO.UK LTD FCA registration number is 731400. The Guitar Amp and Keyboard Centre Limited FCA registration number is 684977. Credit provided subject to age and status. Minimum spend applies. Not all products offered by Secure Trust Bank PLC are regulated by the Financial Conduct Authority.

V12 Retail Finance Limited. Registered in England and Wales 4585692. Registered office: V12 Retail Finance Limited, Yorke House, Arleston Way, Solihull, B90 4LH. Authorised and regulated by the Financial Conduct Authority. Our FCA reference number is 679653.